Service Hotline

HHO Carbon Cleaning Machine Catalytic Automotive Cleaner Carbon Remover For Cars

Car Carbon Cleaning Machine：

1. Carbon Cleaning using HHO gas cleans away the carbon build-up efficiently and without mess or harm to the environment.
The results are more low RPM power in a smoother running and more efficient engine.
2. Different from the traditional carbon reducing methods; no pollution, no harmful gases or chemical additives to harm you, your car or the environment. Save time and money by using the Carbon Cleaning System; increase your business potential, customer base and profits.
3. After using the Car Carbon Cleaning machine, carbon build-up is completely cleaned away, engine efficiency is increased, power and performance are restored, life expectancy is improved and engine emissions are reduced.

Characteristics:

Why does the EGR valve get dirty ?

The EGR valve is designed to cool exhaust gas by burning exhaust for a second time within the intake system. This results in the reduction of nitrogen oxide emissions. Recirculation of the exhaust leads to a gradual accumulation of carbon particles inside the inlet. These deposits eventually develop into a black layer of soot, which can lead to various engine problems and even engine failure.
 
The short-term benefits of the EGR valve lead to a faster saturation rate inside the engine. Soot forms where the exhaust passes into the intake, and even within the valve itself, causing various problems. Fuel injectors, which are delicate and expensive components of the engine, may become partially clogged. As for the EGR valve, soot and grime may prevent it from properly opening and closing. If it becomes stuck in the closed position, it will lose all function. The vehicle will continue to run properly, however it will emit nitrogen oxides at levels beyond the threshold of what is legally tolerated according to area regulations. On the other hand, if the EGR valve becomes stuck in an open position, the engine will become saturated at an even faster rate. Over time, the vehicle will lose acceleration power and certain symptoms will manifest, such as persistent stalling.

Catalytic principle:

Gasoline is a heavy molecular chain hydrocarbon with many carbon-hydrogen bonds. The intermediate product produced by the combustion process is CO. According to theoretical analysis and experimental detection, CO is in the case of pure air, even at a temperature of 700 °C. The burning is also incomplete. However, after the introduction of hydrogen and oxygen molecules and hydrogen and oxygen radicals, the combustion is significantly accelerated. At the same time, because the temperature of the oxy-hydrogen flame is as high as 2800 degrees, any flame retardant carbide will gradually burn out.

When needs to clean carbon:

1. When the engine idle speed is unstable, Engine jitter, and Oil spill.

2. When you feel the engine power decreased and Bad acceleration.

3. When Cold start is difficult, surge, noise increases, exhaust emissions exceed the standard.

4. When the driving mileage reached 50,000 kilometers.