- Fuel Injector Cleaner Machine Car Injector Tester Gas Fuel Injector Cleaner
Categories Injector Cleaner & Tester Album View larger image Brand Zeayeto Model FIC-601 Color Red Application Car Engine Warranty 1 Year Input Voltage 12V Power 230W Certification CE Product name FIC-601 injector cleaner & tester Weight 27KG FOB port Shenzhen Terms of Payment L/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal Update Time 2020-02-18Detail Information
Fuel Injector Cleaner Machine Car Injector Cleaner Gas Fuel Injector Cleaner
The operation of the injectors plays a fundamental role in the power of each engine. Due to poor fuel, the injector does not work well, causing serious carbon accumulation in the cylinder; the cylinder and piston ring accelerate wear, resulting in unstable idle speed, increased fuel consumption, accelerated acceleration, difficulty in starting and excessive discharge, and severely blocked the spray. The nozzle is damaged by the engine. Therefore, it is necessary to clean the injector regularly, and if it is not cleaned for a long time or the nozzle is frequently cleaned, it will have a bad influence.
Injector cleaner and tester machine
Ambient temperature range
1) Remove the injector from the vehicle engine to check the o-rings inside for damage. Replace the damaged 0-ring with another same type 0-ring to avoid leakage during testing. Put the outside of injectors in gasoline or detergent, and wipe them with soft cloth after cleaning the outside oil sludge carefully.
2)Check the liquid level and refill test liquid when necessary. Fil1 the test liquid through the filler on the side of the unit and observe the liquid level in the fuel level viewer. In most cases, filled the liquid up to1/2 of the tank capacity.
3) Turn on the power switch on the right of the Cabinet.
4)Fill ultrasonic detergent into the ultrasonic cleaning launder so that the needle valve of the injector is covered by the detergent.
5) Connect the injectors with the right couplers.
Note:Test liquid and detergent are provided by user self. The test liquid is used for uniformity/sprayability test, leakage test, injecting flow test and Automatic Test. The mixture of fuel and detergent is used in on-vehicle cleaning. The ultrasonic cleaning uses special injector detergent.
1. Provide product information
2. Product operation guide
3. Logistics monitoring
4. 1 year maintenance guarantee
1. Free maintenance
2. Provide technical support
3. Free marketing support
4. Free training
5. Free OEMRelated Productsnavigation
- Contact Person
- Eric Liu
- leave a message:
- Contact Now
- 3rd Floor , No.59 building , Third Industry Zone, XiTian Community, Gongming Town, Guangming District, Shenzhen, China