Home > Products > Engine Flush Machine >

LS-301 Lubrication System Dialysis Cleaning Machine Engine Cleaning Engine Oil Extractor

LS-301 Lubrication System Dialysis Cleaning Machine Engine Cleaning Engine Oil Extractor

LS-301 Lubrication System Dialysis Cleaning Machine Engine Cleaning Engine Oil Extractor
LS-301 Lubrication System Dialysis Cleaning Machine Engine Cleaning Engine Oil ExtractorLS-301 Lubrication System Dialysis Cleaning Machine Engine Cleaning Engine Oil ExtractorLS-301 Lubrication System Dialysis Cleaning Machine Engine Cleaning Engine Oil Extractor
CategoriesEngine Flush Machine
AlbumView larger image
BrandZeayeto
ModelLS-301
colorred
Brand NameZeayeto
Product namecar lubrication system washer
Warranty1 Year
Power120W
VoltageDC12V
LanguageEnglish
Model NumberLS-301
FOB portShenzhen
Terms of PaymentL/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal
Update Time2019-09-22
Detail Information

LS-301 Lubrication System Dialysis Cleaning Machine Engine Cleaning Engine Oil Extractor


Function

1. Fully automatic cycle cleaning, the addition of the machine and the car form a new dynamic cycle

2. The cleaning time can be set according to the specific conditions, such as the degree of pollution of the car lubricant and the mileage.

3. Externally designed food grade high-precision filter cotton filter to ensure cleaning effect


Advantage

1. The oil changer requires only 20 minutes to change the oil.

2. Dynamic circulation cleaning can remove sludge and impurities from the interior of the car, oil passages, etc.

3. Simultaneous combination of oil change and cleaning functions, saving time and efficiency


Parameter

Voltage

DC 12V

Power

120w

Filter accuracy

5μm

Noise

<70db

Oil tube

2*2.5m

Warranty

1 Year

Dimension

430*400*1000mm


When do you change the lubricant?

All oils have a shelf life, and lubricants are no exception. It is best to change the oil when the new car and the newly repaired vehicle are about 2,500 km, which will help to better remove the metal debris generated by the engine during the running-in period. General mineral oil or semi-synthetic lubricating oil, the replacement cycle is 5000-7500 km, and the total synthesis is 8000-10000 km. The oil filter is usually replaced at the same time as the oil is changed, because the oil filter has been contaminated with impurities for a long time.

Premature oil change can cause unnecessary waste, and prolonged oil change timing can cause early engine wear and carbon deposition, and the oil will be gradually oxidized and fail.







     

1. Big depending on the window       2.Pressure gauge                   3.The old and new tubing


      

4.Discharge pipe and return pipe frame       5.refueling                    6.The pulley 














Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service