Home > Products > Engine Flush Machine >

Best Engine Flush For Sludge Engine Oil Flush Treatment DC12V

Best Engine Flush For Sludge Engine Oil Flush Treatment DC12V

Best Engine Flush For Sludge Engine Oil Flush Treatment DC12V
Best Engine Flush For Sludge Engine Oil Flush Treatment DC12VBest Engine Flush For Sludge Engine Oil Flush Treatment DC12VBest Engine Flush For Sludge Engine Oil Flush Treatment DC12V
CategoriesEngine Flush Machine
AlbumView larger image
BrandZeayeto
ModelLS-301
colorgrey
Brand NameZeayeto
Product namecar lubrication system washer
Warranty1 Year
Power120W
VoltageDC12V
LanguageEnglish
FOB portShenzhen
Terms of PaymentL/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal
Update Time2019-06-26
Detail Information

Best Engine Flush For Sludge Engine Oil Flush Treatment DC12V


Feature:

1. The machine adopts cabinet design, which is easy to operate and easy to move.

2. Pressurize the remaining waste liquid to ensure thorough cleaning

3. Transparent measuring cup design, can clearly observe the change of filter cotton

4. Automatic identification of positive and negative power supplies

 

Compared with traditional methods:

 

 

Machine

Manual

Time

20-30 minutes

50-90 minutes

Effect

Exchange 98% old oil

Exchange 53% old oil

Function

Dynastic cycle cleaning,equal oil change

Only fluid exchange

Cost

Oil, cleaning fees

Oil, labor, cleaning fees


Introduction

According to the vehicle engine maintenance regulations, when the car is driving for a certain period of time or a certain number of kilometers, it should be cleaned and the internal oil circuit should be cleaned.

Due to the high temperature generated by the high-speed operation of the machine, sludge, colloid, and the like are easily generated. Failure to replace the used oil in a timely manner may result in abnormal or malfunction of the engine or even an accident.


Note

Inspection before cleaning the engine (lubrication system cleaning must be performed before replacing the new oil)

1. Pull out the oil dipstick to check if the oil has deteriorated (aqueous) and other unconventional conditions.

2. Turn on the engine to check for abnormal noise.

3. Check engine for oil leaks. (such as engine filter seat, oil radiator, valve cover, crankshaft front and rear oil seal, etc.

There is oil leakage and oil leakage).

1. Observe the carbon deposit at the oil cap and start to communicate with the customer in a timely manner. Risk avoidance.







    

1. Big depending on the window      2.Pressure gauge                  3.The old and new tubing


   

4.Discharge pipe and return pipe frame     5.panel                             6.The pulley 














Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service